Slide Mounting Media
Sigma Aldrich Fine Chemicals Biosciences fluoromountTM Aqueous Moun
FLUOROMOUNTTM fluoromountTM Aqueous Moun
Electron Microscopy Sciences Slide Coating Adhesive 100 ML
Prepared from 3-aminopropyltriethoxysilane in acetone. Good for coating glass slides to adhere paraffin sections for further processing without sections falling off from the slide. READY TO USE.
Electron Microscopy Sciences Permount™ Mounting Medium 500 ML
Permount is a toluene-based synthetic resin mounting medium that is ideal for rapid mounting and long term storage of slides. Its low viscosity allows for a thinner mounting layer offering better optical quality and bubble-free preparations. It has a refractive index near that of a fixed protein which helps to keep images free of distortion. Use for mounting coverslips to slides with thick or thin specimens. Permount preserves most biological stains with little or no fading when the slides are stored in darkness. It contains an anti-oxidant to prevent the formation of annular rings and its high softening point (155 degree C/311 degree F) makes it suitable for microprojection.
Cayman Chemical LNP Encapsulation Buffer Tabl
A multi-kinase inhibitor inhibits CK2 (IC50 0.098 UM) the PI3K subunits p110a p110B p110 and p110Y (IC50s 0.497 0.554 0.331 and 3.8 UM respectively) and DNA-PK (IC50 6 UM) among other kinases as well as CK1 GSK3a and GSK3B by greater than 40 at 10 UM reduces viability of SGC-7901 cells at 12.5 25 and 50 UM induces apoptosis and autophagy in SGC-7901 cells at 50 UM reduces tumor volume in DLD-1 and LoVo mouse xenograft models at 2 ng/ml/kg reduces aging-induced increases in the number of aging SA-b-gal-positive human VSMCs at 20 UM in the 5th to 15th generations
Cayman Chemical AOCS MedIM nd LNgchaIn F 50mg
A bacterial metabolite inhibits the growth of A aurescens A globiformis A oxydans A pascens and R erythropolis bacteria (MICs 10 1 10 3 and 10 g/ml respectively) and HMO2 HepG2 and MCF-7 cancer cells (GI50s 0 28 0 42 and 2 2 g/ml respectively) active against P falciparum and T rhodesiense (IC50s 1 19 and 1 97 g/ml respectively)
Electron Microscopy Sciences Epo-Fix Embedding Kit Small Clear
A two component epoxy resin, characterized by negligible shrinkage during curing and good mechanical properties in its hardened state. It is particularly suited for embedding hard samples of complicated shape and for vacuum impregnation. Samples such as paper, silicon, ceramics, metals, wafers, and chips are suitable to be used with Epo-Fix. Kit consists of: 1 kg resin, 120 g hardener, 15 cups, 15 stirrers, 1 x 5 mL and 20 mL syringes.
Electron Microscopy Sciences Two Part Conductive Silver Paint, 14 g kit
This electrically conductive silver epoxy is used for adhering samples as well as solderless connections such as bonding in electric design, prototype and repair work, circuit board repair, surface mount connections, static discharge, shielding and grounding. It is also ideal for the bonding of heat sensitive components. Its curing time is within ten minutes at 100 degree F (38 degree C), or at room temperature. Conductivity is 0.001 ohm/cm.
Electron Microscopy Sciences EMS CCC Thinner 30 ML
An electrically Carbon Conductive Cement for specimen mounting in all SEM work. After drying of the cement, immediate investigation of conductive specimens is possible. Non-conductive specimens need only to be coated with carbon or metal. Thinner is available if the cement viscosity is too thick.
Electron Microscopy Sciences Graphite Spray Adhesive 450 GR
An easy to use graphite spray to coat small samples. It is fast drying and produces a very flat, thin, and uniform graphite film. Its service temperature is up to 204 degree C. It's electrical resistance is 1.2 kohm/sq" at 1 ml thickness.
Electron Microscopy Sciences EMS Silver Conductive 18DB70X Coating 15 GR
Silver Conductive Coating 18DB70X is a direct substitute for Silver Conductive Fluid 416, which is no longer available. This material was specially formulated for use in geographic areas that demand the use of low VOC (Volatile Organic Compounds) products. It also provides low ohms at very thin dry film thickness on almost any surface, and exhibits excellent long term shielding and grounding properties.
Electron Microscopy Sciences Low viscosity embedding media kit, 1 kit
Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam. Kit consists of: 450 ml NSA, 225 ml ERL 4221 , 225 ml DER 736 , 25 ml DMAE.
Electron Microscopy Sciences LR White resin only; Hard Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.